Home » News » Does Your AOI Machine Still Require Manual NG Board Removal? Let Shengdian's Smart NG/OK Sorting Conveyor Handle It Automatically!

Does Your AOI Machine Still Require Manual NG Board Removal? Let Shengdian's Smart NG/OK Sorting Conveyor Handle It Automatically!

Views: 0     Author: Site Editor     Publish Time: 2026-11-17      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
sharethis sharing button

In an SMT production line, you may have already invested in AOI inspection equipment to improve product quality and inspection efficiency.

But have you ever considered what happens after the AOI machine detects a defective PCB?

If an operator still needs to stand beside the machine, wait for an NG board, and manually remove and sort it, then although the inspection process is automated, PCB handling after inspection still depends on manual operation.

Especially in factories with high production speeds or frequent product changes, manual board handling increases labor requirements and creates additional pressure on production management.

Is there a way to automatically store NG boards while allowing OK boards to pass through normally?

This is exactly the problem that Shengdian's Smart NG/OK Sorting Conveyor is designed to solve.

1. An Often-Overlooked Problem: What Happens to PCBs After AOI Inspection?

When developing SMT automation equipment, we always pay attention to one important detail: even if an individual machine performs well, poor coordination with upstream and downstream equipment can still affect the efficiency of the entire production line.

For example:

When the AOI machine detects an NG board, an operator may need to remove it manually.

When NG boards appear continuously, manual handling may struggle to keep up with the production speed.

Defective and good PCBs need to be separated to avoid mixing them up.

When downstream equipment temporarily does not require a PCB, a buffering solution is needed to manage the board flow.

These problems may seem small individually, but they can create additional workload and operational challenges in everyday SMT production.

What a factory really needs may not be another operator, but a machine that can automatically handle PCB sorting and buffering.

2. Shengdian NG/OK Sorting Conveyor: Let Every PCB Go to the Right Place

Designed for installation after AOI, SPI and other inspection equipment, Shengdian's NG/OK Sorting Conveyor provides a practical solution for automatic PCB sorting and temporary storage.

Its working principle is simple but effective.

When an NG signal is received:

The PCB moves to the designated position, and the middle lifting mechanism automatically rises to store the defective board.

The machine can temporarily store up to 10 NG boards.

When the NG storage area reaches its maximum capacity, an audible and visual alarm is activated, and a warning message appears on the touchscreen, reminding the operator to remove the stored boards.

When no NG signal is received:

The PCB passes directly through the conveyor and continues to the next production process without additional manual handling.

When downstream equipment temporarily does not require a PCB:

The machine can also support OK board buffering, providing greater flexibility for different SMT production line configurations.

In simple terms:

NG boards are automatically sorted and stored, while OK boards can either pass through directly or be temporarily buffered according to production requirements.

This helps reduce manual intervention and makes PCB handling after AOI inspection more organized and efficient.

3. More Than Just Operation – Designed for Stable and Reliable Performance

For SMT equipment, appearance is only the beginning. What customers really care about is whether the machine can operate reliably, integrate with existing production lines, and remain easy to operate.

The SD-RC series NG/OK Sorting Conveyor is designed with these practical requirements in mind.

Reliable Control System

Equipped with a Panasonic PLC control system, the machine performs corresponding sorting operations according to external inspection signals.

User-Friendly Touchscreen Interface

The touchscreen provides clear operating information and includes automatic fault diagnosis and audible and visual alarm functions, making daily operation and maintenance more convenient.

Stable PCB Transfer System

Driven by a 4240 stepper motor with a gear reducer, the machine uses dedicated guide rails and imported 3.8 mm flat belts to ensure smooth PCB transportation.

Up to 10 NG Boards for Temporary Storage

Operators do not need to remove every defective board immediately. The machine can temporarily store up to 10 NG boards and automatically trigger an alarm when the storage area is full.

Flexible PCB Size Options

Three standard models are available:

SD-600RC: Supports PCB sizes up to 450 × 350 mm.

SD-800RC: Supports PCB sizes up to 650 × 350 mm.

SD-1000RC: Supports PCB sizes up to 850 × 350 mm.

The standard PCB transfer height is 900 ± 30 mm. Left-to-right or right-to-left transfer directions are available, and customized machine dimensions can be provided according to your production line layout.

Our goal is not simply to manufacture a machine that performs one function, but to provide equipment that genuinely fits into your production process.

4. See It in Action: Welcome to Shengdian's Factory

When it comes to automation equipment, we believe that a real operating video can tell you more than pages of product descriptions.

During equipment production and testing, we pay attention to every important operation:

Does the PCB enter the machine smoothly? Does the lifting mechanism respond correctly when an NG signal is received? Is the transportation stable during continuous operation? Does the full-load alarm work properly?

These are all important details that need to be checked before equipment delivery.

We also welcome customers to watch our factory demonstration videos to see the complete working process, from PCB entry and automatic sorting to temporary storage and alarm notifications.

If you are looking for an NG/OK sorting solution for your production line, simply share your PCB dimensions and existing equipment layout with us. We will help you evaluate the suitable configuration.

5. About Shengdian: 25 Years Dedicated to SMT Equipment

Shenzhen Shengdian Electronic Equipment Co., Ltd. is a professional manufacturer specializing in SMT equipment R&D, design and manufacturing.

For 25 years, we have focused on the SMT equipment industry.

From PCB loaders and unloaders to conveyors, NG/OK sorting machines, PCB transfer systems, solder paste printers and reflow ovens, we continuously develop and manufacture equipment based on the practical needs of electronic manufacturing factories.

We understand that no two production lines are exactly the same.

Some customers need standard equipment, while others require special conveyor widths, different transfer directions or customized designs to match their existing machines.

That's why we prefer to understand your actual production requirements before discussing the right equipment configuration.

For us, delivering a machine is only the beginning of a business relationship. Making sure that the equipment genuinely fits your production line is what matters most.

Shengdian | Your SMT Equipment Manufacturing Partner.

6. Does Your AOI Production Line Need an Automatic Sorting Solution?

If you are currently using AOI or SPI inspection equipment and want to reduce manual PCB handling, improve NG board management or achieve smoother connections between inspection equipment and downstream production processes, we would be happy to discuss your requirements.

To help us recommend the right machine, please share the following information:

What is the maximum PCB size you need to handle?

Are you currently using AOI or SPI inspection equipment?

Do you need NG board storage only, or buffering for both NG and OK boards?

What is the transfer height of your existing production line?

You can also send us photos of your production line or equipment layout.

Based on your actual requirements, Shengdian can help you confirm the machine dimensions, transfer direction and signal interface configuration.

Not every factory needs a complicated automation system, but every production process deserves to become simpler and more efficient.

Contact Shengdian today to explore our SMT equipment and customized automation solutions.

Website: https://www.szsdsmt.com/

25 Years. One Focus. SMT Equipment.

 

Telephone

+86-135-5475-8169
​Copyright © 2024 SHENGDIAN ELECTRONICS. All Rights Reserved.
Technology by leadong.com

Support

About

Subscribe to our newsletter

Promotions, new products and sales. Directly to your inbox.