Maintenance methods of PCB loading and unloading machines-Shengdian SMT equipment factory

First of all, regular cleaning is an important step in maintaining PCB loading and unloading machines. Since impurities such as dust, grease and debris accumulate inside the equipment and on the guide rails and drive belts during the production process, they need to be removed regularly. They can be cleaned with a vacuum cleaner or a clean brush. At the same time, be careful not to use a vacuum cleaner with static electricity to avoid static effects on the equipment. Shengdian SMT equipment factory

Secondly, lubrication is a key step to protect the normal operation of the equipment. The transmission parts and slides on the PCB loading and unloading machine need to be lubricated regularly. Before lubrication, please remove the old lubricant and dirt so as not to cause contamination of the new lubricant. Use the appropriate lubricant and follow the instructions in the machine's instruction manual.

It is also important to check and replace wearing parts. The wearing parts of PCB upper and lower board machines include drive belts, guide rails, belts and so on. Regularly check their wear and tear, and replace them once they are found to be worn or aging to ensure the normal operation of the equipment. Shengdian SMT equipment factory

In addition, regular calibration is also an important step in maintaining PCB loading and unloading machines. Regular calibration of parameters such as motor speed, conveyor width and suction nozzle position can ensure the accuracy and stability of the equipment.

Finally, in order to protect the PCB loading and unloading machine, it is also necessary to use it properly and follow the operating procedures. Employees should receive relevant training to understand the correct use of the equipment, and strictly in accordance with the operating procedures for operation. Avoid incorrect use and operation, so as not to cause unnecessary damage to the equipment. Shengdian SMT equipment factory