The structure of the solder paste mixer and the precautions for use

A solder paste mixer is a device used to mix and stir the solder paste required in PCB soldering. It mainly mixes the various components in the solder paste by rotating them together to ensure that they can be applied evenly during the soldering process.

The structure of SMT equipment solder paste mixer usually consists of the following parts: agitator, motor, control system and so on. Among them, the stirrer is the most critical component, which usually consists of a rotating shaft and a number of stirring knives that can mix the solder paste together adequately. The motor provides the power to enable the stirrer to rotate. The control system is used to control the motor's speed and running time and other parameters.SMT Equipment Factory

When using Shengdian solder paste mixer, you need to pay attention to the following points:

1. Strictly follow the instructions in the operation manual and do not change the parameters at will.

2. Before putting the solder paste, it is necessary to stir the solder paste for pretreatment in order to avoid problems such as air bubbles during the stirring process.

3. Pay attention to the observation during the mixing process, and stop the machine in time for maintenance when abnormal situation is found.

4. Regular cleaning equipment to ensure that it is in a normal state.

In short, the solder paste mixer is essential equipment for PCB soldering, it plays a key role in the stability of solder quality and product quality improvement. Therefore, when choosing a solder paste mixer, you need to take into account its quality, brand, after-sales service and other factors, and strengthen the management and maintenance in the use of the process to ensure the stable operation of the equipment.SMT Equipment Factory