Brief:Features:This equipment is used for SMT production line multi-line (using robot + corner way to the belt assembly line and then into the reflow oven, saving labor costs and improve production efficiency, improve quality)1、Using Samkoon PLC, high-precision photoelectric, LEF intermediate relay control system, stable and reliable.2、Touch screen display operation, with fault sound and light alarm, automatic diagnosis function.3、Step motor control, speed and distance adjustable.4、Imported steel wire belt drive, accurate positioning, durable.5、Using Taiwan silver linear slide rail, good sliding, durable, accurate positioning.6、Panning position can be set to meet a variety of production processes, simple and convenient operation.7、Conveying height is 900mm±20mm.8、Power: single-phase 220V 50/60HZ 300W.9、Easy to use touch screen function control interface10、Shift the load distance can be set at will.11、Multi-wire PCB will not overlap12、Compatible SMEMA interface
Brief:Features:1. The precision screw rod is widened to ensure that the transport rails are parallel to each other;2. It adopts professional wear-resistant anti-static flat belt and special aluminum profile guide rail to ensure smooth connection and stable transportation;3. Standard with signal connectors for online connection to other devices4. According to customer requirements, we can make conveyor with different lengths of guide rails.5. Equipped with anti-static rubber to better prevent static electricity;6. The transfer motor uses an adjustable 4248 extended stepping motor7.Photoelectric switch using Hufeng round photoelectric, durable8. The flat belt transmission wheel is driven by double bearings and is stable without harming the belt,9. The two ends of the conveyor guide rail are processed into eight characters into the PCB, and the PCB is sent in and out of the conveyor smoothly without shaking
Brief:Features:1. The precision screw rod is widened to ensure that the transport rails are parallel to each other;2. It adopts professional wear-resistant anti-static flat belt and special aluminum profile guide rail to ensure smooth connection and stable transportation;3. Standard with signal connectors for online connection to other devices4. According to customer requirements, we can make conveyor with different lengths of guide rails.. Equipped with anti-static rubber to better prevent static electricity;6. The transfer motor uses an adjustable 4248 extended stepping motor7.Photoelectric switch using Hufeng round photoelectric, durable8. The flat belt transmission wheel is driven by double bearings and is stable without harming the belt,9. The two ends of the conveyor guide rail are processed into eight characters into the PCB, and the PCB is sent in and out of the conveyor smoothly without shaking10. Adjustment width adopts the double set of wire rod, dual-track independent control, convenient operation
Brief:Features 1. Design of sheet metal dusting structure 2. Increase the design to improve stability 3. In line with the ergonomic design concept, so that the operator's arm is not easy to fatigue 4. High-precision screw adjustment wide and narrow, to ensure that the transport rails are parallel 5. According to customer requirements to customize the length of the machine 6. According to customer requirements, the number of stop plates 7. The transmission speed can be adjusted 8. Using professional wear-resistant anti-static flat belt, 9. Special electrophoresis aluminum profile rail 10. Work surface anti-static rubber to better prevent static electricity 11. Transfer motor is a 15W speed controlled motor. 12. Compatible with standard SMEMA interface
Brief:Features 1. Design of sheet metal dusting structure 2. Increase the design to improve stability 3. In line with the ergonomic design concept, so that the operator's arm is not easy to fatigue 4. High-precision screw adjustment wide and narrow, to ensure that the transport rails are parallel 5. According to customer requirements to customize the length of the machine 6. According to customer requirements, the number of stop plates 7. The transmission speed can be adjusted 8. Using professional wear-resistant anti-static flat belt, 9. Special electrophoresis aluminum profile rail 10. Work surface anti-static rubber to better prevent static electricity 11. Transfer motor with double stepper motor 12. Compatible with standard SMEMA interface
Brief:Features: The precision screw rod is widened to ensure that the transport rails are parallel to each other; It adopts professional wear-resistant anti-static flat belt and special aluminum profile guide rail to ensure smooth connection and stable transportation; Standard with signal connectors for online connection to other devices According to customer requirements, we can make conveyor with different lengths of guide rails. Equipped with anti-static rubber to better prevent static electricity; The transfer motor uses an adjustable 4248 extended stepping motorPhotoelectric switch using Hufeng round photoelectric, durable.The flat belt transmission wheel is driven by double bearings and is stable without harming the belt, The two ends of the conveyor guide rail are processed into eight characters into the PCB, and the PCB is sent in and out of the conveyor smoothly without shaking
Brief:Product features：Exterior structure: plate gold structure and aluminum profile into the frame, the surface spray treatment and the color is wavy white.Microcomputer PLC control system works stably and reliably.Operating by touch screen, with automatic fault diagnosis function, convenient man-machine dialogue. Multiple sound and light and touch screen inside prompt alarm function.Using stepper motor to transmission.The bad board can be stored 10 pcs by rising and the good boards can be directly transported to the next machine.Applicable behind AOI and SPI devices.Double line number to distinguish NG\OK.
This equipment is used for SMT production line two in one or a diversion into two. Two-In-One-Out can save labor costs and save reflow soldering costs and electricity. One-In-Two-Out can save labor and equipment costs, this machine is used for two or more machines between the staggered panning, will be the PCB board panning to the next machine to continue to produce (suitable for Panasonic, Fuji (FUJI), YAMAHA, Samsung, Siemens dual-track mounter One-In-Two-Out and Two-In-One-Out).Using Panasonic PLC, Panasonic photoelectric CX442, YIJIA intermediate relay control system, stable and reliable work.Touch screen display operation, with the function of fault sound and light alarm and automatic diagnosis.Stepper motor control, speed, distance is adjustable.Using the imported belt steel wire belt drive, accurate positioning, durable.Using Taiwan upper silver linear slide rail, good sliding, durable, accurate positioning.A variety of modes are available for choice, to meet a variety of production process, simple operation, convenient.Translation single trolley drive: step drive + step motorTrolley rail transmission ordinary speed regulating motor transmission.The top safety cover can be opened to facilitate the processing of the machine hardware during maintenance.Width adjustment device for stable balance (hand control wire rod adjustment)The translation distance can be set at will.Compatible with a standard SMEMA interface.
Brief:Features: 1.This equipment is used for SMT. This equipment is used for the production line 90 degree lifting corner entry and exit board operation, two in one or one split into two. 2.Easy to use intelligent touch screen function control interface. 3.Adjustable corner speed ensures that the PCB board does not slide. 4.Width adjustment device for stable balance (hand control wire rod adjustment). 5.Smaller machine footprint. 6.Compatible SMEMA interface.
