PCB Suction Loader Machine

1、Used at the beginning of the SMT production line, after receiving the signal from the downstream machine, the stacked PCB boards will be sucked up and sent to the top of the guide rail and transferred to the downstream machine.

2、The enclosed design guarantees the highest level of safety protection.

3、The top safety cover can be opened for easy handling of the machine hardware during maintenance.

4、Adjustable nozzle position ensures tight suction of the board.

5、Stable and balanced width adjustment device (hand crank control screw adjustment)

6、The control system adopts Panasonic PLC control, the operation interface adopts touch screen, equipped with automatic alarm system.

7、Frame structure using sheet metal welding, surface paint treatment, colorful human-machine interface window

8、The lifting mechanism adopts the brake motor lifting setting, the lifting distance is adjustable, which effectively shortens the time of board loading, and up to 300 pieces of PCB can be stacked (0.6mm thick circuit boards).

9、The transfer structure adopts the stepping motor to transfer the load, the starting and stopping can be accelerated and decelerated setting, the transportation is smooth and not easy to punch the board.

10、Equipped with a standard SMEMA signaling port for in-line connection with any other equipment.

11、Standard antistatic Magazine loading and vacuum suction board loading are combined into one mode, saving manual board insertion.

12、The lifting distance of the Magazine can be set according to the PCB thickness.

13、Three-point positioning type upper and lower pneumatic clamping ensures accurate Magazine position.

14、Push board protection system ensures that PCBs will not be pushed out, reducing process losses and increasing output capacity.