Brief:1、Solder paste is placed at 45 degrees and rotates along the axis, so that the paste nolonger adheres to the can lid. 2、Double safety device to ensure personal safety. 3、Stirring at the same time has the effect of removing air bubbles. 4、Special control circuit, fully consider the process control of stirring solder paste. 5、Proven speed ratio, to avoid the impact of the impact of tin powder and temperatur rise too large on the quality of the solder paste.
Brief:SD-825S/833S/839S SMT board Automatic PCB Unloader is mainly used in the back of SMT production line to retrieve PCB boards from automatic solder printing machine, SMT pick and place machine and other equipment groups into the Magazine. It has the function of automatic board retrieval, which can save labor cost, improve production efficiency and increase product output.
Brief:Single Rail PCB Reject Conveyor features： Exterior structure: plate gold structure and aluminum profile into the frame, the surface spray treatment and the color is wavy white. Microcomputer PLC control system works stably and reliably. Operating by touch screen, with automatic fault diagnosis function, convenient man-machine dialogue. Multiple sound and light and touch screen inside prompt alarm function.Using stepper motor to transmission.The bad board can be stored 10 pcs by rising and the good boards can be directly transported to the next machine.Applicable behind AOI and SPI devices.Double line number to distinguish NG\OK.
Brief:Features:1. Special v-cut PCB board, stable operation mechanism, prevent improper external forces caused by PCB tin surface, electronic parts welding spot, and other electrical circuit due to the process of folding plate damage.2. Special round cutter material design ensures the smoothness of PCB surface.3. Fine adjustment of cutter wheel :0-2mm, lower plate knife can be adjusted :0-50mm4. Controllable five-stage adjustment of cutting travel distance, 0/100/200/300/400, quick switching between different PCB sizes.5. The height of upper knife can be adjusted according to plate and plate thickness to make more accurate cutting. The cutting thickness can be 0.6-3.0mm, and the remaining 1/3 of the thickness of standard V groove6. High-frequency eye protection lighting device to improve the operation quality of operators.
Brief:Closed design guarantees the highest level of safety protection.The top safety cover can be opened for easy handling of the machine hardware during maintenance. Adjustable position of the board and the board to ensure accurate alignment of the PCB board. Transport rail parts can be lifted up and down.
